- Comparison Chart
- Boat size Up to 30'
- Horsepower 2.5hp
- Voltage 12 VDC
- RPM 3500
- Current 300 Amps
- Layout Single Prop
The WB230 Stern Thruster has been developed specifically for wakeboats with a horizontal wake-shaping plate for extremely easy mounting requiring no holes below the waterline. The thruster can also be mounted to the boat's transom on models where there is sufficient side clearance. The mounting position creates zero drag as the thruster rides above water when the boat is on plane, and the unit can be easily installed in only a few hours with no need for an additional battery.
The powerful, water-cooled 12V motor and heavy-duty 8" aluminum propeller provide instant lateral thrust for stress-free open water maneuvering and in any docking situation. The thruster is anode protected and available in three beautiful polychromatic(metal flake) colors to complement the high-end look of any sports boat.
Shipped as a complete kit including:
- Motor controller
- Wireless joystick and remote keyfob
- Wiring harness and all mounting hardware
- Fuse with digital voltage indicator
- Waterproof bulkhead connector
- Battery switch
Significantly lower installed cost, more responsive performance, no mounting holes below the waterline, virtually silent operation – These are only a few of the many benefits you receive when choosing a Sideshift thruster over conventional thruster systems.
Features Sideshift Conventional Thrusters Easy same-day installation Yes No No tunnel or mounting holes below waterline Yes No In-water installation possible Yes No Virtually silent operation Yes No Zero drag when planing Yes No Pivot point advantage for optimal performance Yes No Prop-in-water design for greater responsiveness Yes No Canadian built to perform in heavy weather conditions Yes No Can be retrofitted to a future boat Yes No Virtually maintenance free Yes No All-inclusive kit Yes No 2-year Warranty Yes Yes Potential to void hull warranty No Yes Fits any type of boat – cruiser, trawler, cuddy, sailboat, pontoon or houseboat Yes No Typical installed cost for boats up to 75’ $3,300-$6,700 $7,500-$15,000 Detailed Cost Breakdown Sideshift Conventional Thrusters 2.5hp – 7.5hp Thruster $2,900-4,900 $3,000-7,000 Additional hardware $200 $300-500 Batteries/cable $200-500 $200-500 Installation - DIY - Not Available Installation - Dealer $800-1,200 $4,000-7,000 Total Installed Cost $3,300-6,700 $7,500-15,000
- Return Policy
All Sideshift Inc. products are warrantied to be free from defects due to faulty workmanship or defective materials for a period of two years.More
Products failing within the warranty period should be returned to Sideshift assembled and complete with a copy of the original invoice. Return requests must be emailed, mailed or faxed to Sideshift. The request should include an itemized list of material, stating the reason for the requested return. Upon approval Sideshift will assign a Return Merchandise Authorization Number which must be placed on the return shipping container. Delivery of returned merchandise will be refused and credit will not be issued without written authorization and shipping instructions from Sideshift.
Sideshift Inc. will not be responsible for accidental damage or expense caused by the following conditions:
- Damage due to improper installation
- Improper wire size or low voltage conditions
- Burn-out due to overloading motor or related damage
- Tampering with or altering the motor before, during or after installation
- Damage due to collision of any kind
- Damage due to entanglement of foreign objects such as fishing line and netting material
- Warranty does not cover paint damage, dents, nicks and normal wear and tear of the product following delivery and installation
In the unlikely event that you would want to return your Sideshift thruster system, please note the following;More
All returns are subject to a possible restocking charge. We do our best to keep this charge reasonable, but keep in mind that all returns must be inspected, tested, refurbished in some cases, and then repackaged. All of these steps have costs associated.
All return requests must be emailed or initiated by phone with Sideshift. The request should include a reason for return, as well as itemized list of material. Upon approval Sideshift will assign a Return Merchandise Authorization number (RMA) which must be placed on the return shipping container. All returns must be shipped freight prepaid, and credit cannot be issued on returns with missing parts. Sideshift cannot accept returns for products that have already been installed, or for products that were purchased more than 30 days prior to the return request.